Proto-pasta High Temperature Polycarbonate-ABS Alloy Black-1.75 mm stainless steelsteel filament Nozzle Set-point: 185-215C (hottest on

Nozzle Set-point: 185-215C (hottest on 1st layer for best adhesion)

good results are achieved when printing small parts at 270-290C on a heated bed

Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series

75 KG (1

Proto-pasta High Temperature Polycarbonate-ABS Alloy Black-1.75 mm stainless steelsteel filament Nozzle Set-point: 185-215C (hottest onProto pasta Polycarbonate ABS Alloy is an tough material designed for strong, resilient parts. Properties are excellent and greatly improved over standard ABS. Processing is challenging. For best results, a heated bed is required to control warpage and improve layer adhesion. Cross sectional area should be minimized. 1. 75 mm 500g is on a 8" diameter spool PC ABS is moisture sensitive. Even when stored in a bag with desiccant, drying in an oven for ~